Membership Drive
Title transcribed from original publication
Generated summary: Reports on the MCA membership drive, its closing date, delayed award accounting, and the importance of continuing to recruit members.
Open scan page 2October 1982 · Volume/issue not printed or unknown
Magazine · 16 pages
October 1982 Magazine
Automatically captured text may contain recognition errors. Compare it with the original scan.
PACKING MAIN MEALS:
I pre-pack everything as a complete unit inside a strong
plastic poly bag. For years, I used large size Zip-lock
bags, but now prefer to heat seal them in poly instead.
An inexpensive bar type heat seal machine works fine, or
use an iron set on low-medium (place a few sheets of wax
paper between iron and poly bag so the iron won't stick to
the plastic).
CLIFFS
COR NER
by Cliff Jacobson I pack everything for a complete meal inside the poly
bag. This means packets of instant drink, dessert, candy
bars, ete. I even include about five sheets of paper
toweling with each breakfast and supper meal. Saves
messing a cloth dish towel, is more sanitary...and useful.
When the toweling dries, I burn it or save scraps to clean
the stove, wipe off dirty tent stakes, etc.--things you
don't want to do with a cloth towel.
Putting it all together: Containers first. Some con-
tainers keep the wet out--others leak instantly, crush, or
deteriorate. Jam, peanut butter, honey and the like, all
require bullet-proof plastic bottles that won't leak or
break. Heading the list of GOOD containers are
"Nalgene" bottles. These are quite expensive--about 2-5
bucks each, but they're worth it. Look for the name
"Nalgene" stamped on the lid. These bottles are used to
pack industrial chemicals and so are necessarily inde-
structible. I've found nothing else works as well.
Then I pack each poly bag in a lightweight nylon stuff
sack. I traditionally place breakfast meals in a "green"
bag (get up and go!); lunch goes in yellow; supper in red.
A masking tape label describes the contents of each bag.
You can get round or square bottles in sizes from 250 ml
to a full ter. The nylon bags are an excellent abrasion barrier—-keeps
from puncturing the poly bags when your pack jolts
around on portages. You'll also discover a variety of
useful applications for the nylon bags as the trip wears
on. For example: Use one as a trash bag, a bag for dirty
laundry, miscellaneous small items, pillow sack, ete.
Avoid "food tubes", the type with a cap at one end anda
plastic key at the other (these work like toothpaste
tubes—you fill 'em from the bottom and secure with the
key). The keys break without provovation and spill their
contents all over everything. And they leave a lot of
food smell on the outside no matter how carefully you .
wash them. Food tubes sound like "a better idea", but PACKING THE FAOK:
they're not! I stagger the meals--breakfast, lunch, supper, a new
level, then breakfast, lunch, supper, ete. Some folks
prefer to pack all breakfasts in one pack, lunches in
another, suppers in a third, ete. The result is a very
uneven weight distribution between packs as lunches are
usually heaviest, breakfasts lightest. Color coding the
bags (green, yellow, red) as I've suggested makes dis-
covering the "right meal" less of a challenge.
"Golden Griddle" pancake syrup bottles work well. The
"pop-tops" are unreliable and open when you least expect
it. I simply melt the tops (push-button part) into a gooey
knob in the burner of my trail stove, then squash it flat
with a stick. The result is a completely waterproof seal
with no chance of leaking. Or, substitute metal caps
(available at wine-making stores) for the questionable
plastic ones. Though not directly related to foods, I suggest you make
a fabric silverware roll. Include enough pockets so you
ean store spices and cooking utensils in the roll. And
design the roll with snaps or ties at the top so you can
hang it from a clothes line. When it rains, erect my rain
tarp and string a chute cord line just beneath. I hang my
eooking utensil roll from the line next to my cooking
spot. This keeps utensils handy and out of the wet and
mud. Ialso include a"mini tablecloth" made from a two-
foot square of heavy nylon. Helps organize things when
I'm working on a wet or damp surface.
Check plastic containers for leakage by screwing the top
down and squeezing the bottle tightly. If there's a hint of
a leak, don't buy the bottle!
One of the problems you'll have with any plastic bottle is
getting rid of the food smell after your trip. I wash
bottles with detergent, then pour a small amount of
bleach in them. I cap the bottles and leave the bleach
inside for several hours or days (until I get around to
dumping them). Then I dump the bleach and substitute
baking soda and water. The soda water stays inside for COOKWARE
several days to cut odors. Finally, I drain the bottles and
store them open—caps separate. I've found this is a good Assembling a good cook set is easy; it just depends on
way to kill bacteria (which become imbedded in the soft how much money you want to spend, and how compact
plastic) and cut odors. you want the outfit to be.
Another option is to melt paraffin (Gulf wax) and pour a My advice is to avoid commercial "packaged" cook kits
thin film of it into each bottle. Foods are all compatible like the Mirro and Palco, and assemble your own. You'll
with the neutral wax, which can be later removed by achieve lower cost and greater versatility.
dipping the bottles in near-boiling water. Again, store
plastic bottles with the caps off. Pots: Three nesting aluminum pots, or two pots plus a
six-cup coffee pot with folding wire handles, are all you
Develop a wary eye for useful containers when you go need. The largest pot should serve your biggest crew in
shopping. There are a lot of excellent re-usable plastic the amount of 2-1/2 cups per person. Thus, a crew of six
bottles on the shelves of your grocery store. Even will require a 15-cup, or roughly one-gallon, pot. No need
shampoo bottles ean be pressed into service if you rid to provide a bigger pot than this!
them of the soap smell. The baking soda/water treat-
ment works if you leave it in the bottles long enough The best pots are those made by Sigg of Switzerland, but
(weeks or months!). these are so terribly expensive that it's unrealistic to
12
Generated issue overview: October 1982 issue of HUT!, the Minnesota Canoe Association publication. The issue includes canoeing and outdoor-skills articles, trip reports, association news, event announcements, advertisements, classifieds, and organizational information.
Generated summaries are descriptions, not original captured text. Page-range text shows complete scan pages and may include neighboring material.
Title transcribed from original publication
Generated summary: Reports on the MCA membership drive, its closing date, delayed award accounting, and the importance of continuing to recruit members.
Open scan page 2Title transcribed from original publication
Generated summary: Reviews straight- and bent-shaft canoe paddles made by Bending Branches, describing their construction and inviting readers to try a test paddle.
Open scan page 4Title transcribed from original publication
Generated summary: Explains the Ten Essentials for outdoor trips, presents an expanded 13-item list for day trips, and discusses selected gear and the original essentials list.
Open scan page 5Title transcribed from original publication
Generated summary: Reports on Verlen Kruger and Steve Landick's long-distance paddle journey from Alaska down the Pacific Coast, including mileage and plans for a reception and slide presentation.
Open scan page 5Title transcribed from original publication
Generated summary: Recounts a Twin Ports Chapter outing to the Apostle Islands, with camping, paddling, group activities, and a return trip in difficult weather; it also notes future chapter events.
Open scan page 6Title transcribed from original publication
Generated summary: Describes building a one-off canoe with a foam-core and fiberglass construction method using a male mold, including materials, steps, advantages, drawbacks, and a finished example.
Open scan page 7Title transcribed from original publication
Generated summary: A photo supplement to a cruise report from the previous issue, presenting memories from the Crow Wing River trip through accompanying photographs and an editor's note.
Open scan page 8Title transcribed from original publication
Generated summary: Describes a father-and-son canoe trip on the Big Fork River, including route and outfitter details, rapids, campsites, and river conditions. The supplied OCR cuts off during the account.
Open scan page 8Title transcribed from original publication
Generated summary: Introduces canoe routes, landscapes, access points, campsites, fishing, and visitor resources in Voyageurs National Park, contrasting its character with the Boundary Waters and Quetico.
Open scan page 9Title transcribed from original publication
Generated summary: Recounts an expedition on the remote Hood River in the Northwest Territories, describing challenging whitewater, weather, wildlife, route planning, and Wilberforce Falls.
Open scan page 9Title transcribed from original publication
Generated summary: Describes a Labor Day trip to Rebecca and Curtain Falls, including route choice, portages, campsites, and the scenery at the falls and on the return journey.
Open scan page 11Title transcribed from original publication
Generated summary: Discusses learning and using a canoe pole for upstream travel, river observation, and controlling a canoe in current, with notes on a clinic and the author's experiences.
Open scan page 11Title transcribed from original publication
Generated summary: Offers practical advice on packing meals and cookware for canoe trips, including food containers, organizing meal bags, cleaning bottles, selecting cooking equipment, and packing a cook set.
Open scan page 12Title transcribed from original publication
Generated summary: Announces plans for a Minnesota DNR lease sale involving state lands for copper-nickel exploration and summarizes the areas under consideration and the lease requirements.
Open scan page 13Title transcribed from original publication
Generated summary: Reports the proposed elimination of federal Waterbank funding and relays the Minnesota DNR's case for preserving the program's wetland and wildlife benefits.
Open scan page 13Title transcribed from original publication
Generated summary: Summarizes efforts to establish beverage-container deposits, describing litter and resource arguments, state examples, and opposition to proposed legislation.
Open scan page 14Generated summary: A section listing businesses and services supporting the MCA, with contact details and descriptions of their offerings.
Generated summary: Roster of MCA executive officers and directors with roles, names, contact information, and locations.
Generated summary: Roster of chapter committee contacts for MCA chapters and activity groups.