← Back to The HUT

May 1988 · Vol. 24 No. 5

May 1988 Magazine (Vol. 24 No. 5)

Issue first-page cover

Magazine · 56 pages

May 1988 Magazine (Vol. 24 No. 5)

Captured text — scan page 20

Automatically captured text may contain recognition errors. Compare it with the original scan.

BUILDING--CONTINUED FROM PREVIOUS PAGE

Notice on the drawing the 2x2 crosspieces. We have learned that
it's best to attach them directly to the strongback with lag screws.
When we attach the forms to them, we have oversized holes in both the
2x2 and the form. Aligning the forms becomes very easy, as no
shimming is required.

Another detail on Fig. 4 is the plywood clamps. These are
attached to either end and used to hold the end pieces.

These are made of 1/2" plywood ripped into peices about as wide
as your 2x4, The short piece shown is nailed to the Jonger one and a
pair of these is bolted to the 2x4 extenders.

These plywood plates should leave just enough room for the end
pieces. When the end pieces are installed, they can be held in place
with a small "C" clamp. This system allows much for and aft or up
and down adjustment, very handy when it comes time to fair things up.

When you bolt this strongback together, try to get the soket for
the legs about one-fourth the distance from the ends. By positioning
the spacer, you should be able to build a real snug socket for the
leg. :
A 1x6 cap piece is installed on top of the 2x4 assembly. This
piece can be shimmed up to get a nice flat surface. The ends may
need to be tapered to fit inside the forms.

A chalk line should be snapped down the center of the 1x6. A
more permanent mark may be achieved by stretching a line end to end,
then spray painting lightly over this string.

The 2x2 cross pieces are installed perpendicular to _ the
strongback in such a way that the forms end up on station. They are
lag-screwed permanently in this position.

Try to get well-
seasoned straight lumber j
(that's like trying to sal BPO Comes Pieces
find 18' ash). Use any [e 3
bends in the rails to : 2 ‘
pull against each other, 4 #Pe Cap pms
the strongback should be a — ij
close to straight. The | | yy Rails
chalkline takes care of
the difference.

Built quickly from
Jumber yard products for
a minimum expense.

Perfect? Maybe not, but

it will surely build your r

first ten to twelve 32- Se YN

canoes while you think
about a better one.~-Bob
Brown

Pwo’ 2s od Gusee t

VAN

End View

-_ 3

A

20 HUT!-May 1988

Articles (12) · Summaries (12)

Generated issue overview: May 1988 issue of HUT!, the monthly publication of the Minnesota Canoe Association. The issue includes association and chapter news, canoeing and camping features, river descriptions, event information, advertisements, forms, and classified listings.

Generated summaries are descriptions, not original captured text. Page-range text shows complete scan pages and may include neighboring material.

FROM THE BOW

Title transcribed from original publication

Generated summary: The MCA president discusses the start of the paddling season, the cruise rating system, the Governor’s Cruise, recruiting volunteers, and plans for a continuing HUT! staff and publication leadership.

Open scan page 4

Read captured pages 4–5 →

UPDATE ON DRAGONBOATERS

Title transcribed from original publication

Generated summary: Reports on the Minnesota dragonboat team’s preparations for races in Hong Kong and Chicago, recruitment, fundraising, and the team’s thanks to MCA supporters.

Open scan page 10

Read captured page 10 →

OVER THE LIMB

Title transcribed from original publication

Generated summary: Explains how to make and use a compact throw bag for placing a bear-bag line, handling painters, and other canoe-camping tasks, with a safety warning against using it for rescue without training.

Open scan page 12

Read captured pages 12–13 →

THE CUTTING EDGE

Title transcribed from original publication

Generated summary: Discusses using a compact splitting maul and sheath knife on canoe trips, and gives advice on making sheaths and sharpening cutting tools.

Open scan page 14

Read captured pages 14–15 →

BUILDERS CORNER--IN SEARCH OF THE PERFECT STRONGBACK

Title transcribed from original publication

Generated summary: Reviews the development and requirements of a canoe-building strongback, then describes a portable, self-supporting design made primarily from 2x4 lumber and explains its construction details.

Open scan page 18

Read captured pages 18–20 →

I'D RATHER BE CANOEING

Title transcribed from original publication

Generated summary: The editor reflects on a chapter canoe trip, member contributions, publication deadlines, the workload involved in producing HUT!, and the need for a broader staff and varied participation.

Open scan page 41

Read captured page 41 →

CLOSE-IN RIVER TRIPS

Title transcribed from original publication

Generated summary: Provides brief descriptions of rivers within day-trip distance of the Minneapolis–St. Paul area, noting locations, conditions, navigability, and points of interest.

Open scan page 42

Read captured pages 42–43 →

CRUISING

Title transcribed from original publication

Generated summary: Encourages MCA members to join scheduled cruises or organize additional trips, and invites members to share their knowledge and participate in cruising activities.

Open scan page 44

Read captured page 44 →

WHAT EVER HAPPENED TO JIM JOHNKE?

Title transcribed from original publication

Generated summary: Uses the author’s recollections of MCA history and former member Jim Johnke to discuss volunteer burnout, the need for broader member participation, and the risks of relying on a small group of volunteers.

Open scan page 46

Read captured pages 46–47 →

RIVER CONFERENCE PLANNED

Title transcribed from original publication

Generated summary: Announces a Midwest River Conservation Conference in Hudson, Wisconsin, describing its conservation goals, planned topics, invited speakers, venue, and contact information.

Open scan page 48

Read captured page 48 →

SPECIAL THANKS!

Title transcribed from original publication

Generated summary: Thanks four contributors to the “Canoeing the Far North” slide-show series and argues that wilderness-trip presenters are not necessarily elitist, emphasizing humility and the knowledge gained from backcountry travel.

Open scan page 50

Read captured page 50 →

LACK OF INFORMATION IN THE HEAP?

Title transcribed from original publication

Generated summary: Responds to Don Mitchell’s comments about the far-north slide shows, distinguishing entertainment from practical canoeing information and calling for more useful contributions to HUT!.

Open scan page 50

Read captured pages 50–51 →