← Back to The HUT

November 1969 · Vol. 4 No. 1

November 1969 Magazine (Vol. 4 No. 1)

Issue first-page cover

Magazine · 20 pages

November 1969 Magazine (Vol. 4 No. 1)

Captured text — scan page 5

Automatically captured text may contain recognition errors. Compare it with the original scan.

were obtained through phone calls to Bob Haug as problems
presented themselves.

Building the C2 in my basement presented three major prob-
lems, namely: (1) ventilation, (2) mess, and (3) access for
the molds Problem (1) was resolved by using epoxy resin
and exhaust fams. The mess was tolerated by covering the
floor with polyethelyne sheeting and a very understanding
wife. The stairway into my basement makes a 90 degree turn
at the bottom landing. This made moving in the molds a pro-
blem. In fact, a number of gouges in the plasterboard pro-
vide evidence of how tight the fit actually was. The C2 is
constructed in a two-piece (top and bottom) mold. Each mold
barely fit into the basement. The question was: Could the
finished boat, twice as deep as each mold but without the
mold flange be squeezed out of the basement? A rigorous
geometric analysis of the problem nearly demands a John von
Newmann type consultant. We decided to make the complete
boat in the basement and get it out later. Joanne was hop-
ing for a walkout basement anyway.

My brother-in-law, J. R. Mueller, and myself spent many week-
ends and evenings during the month of March engaged in boat
construction.

The function of polypropelene cloth became apparent as we
tried to get the boat out of the basement. The boat did
get out without damage but it required squeezing the deck
in somewhat. Encouraged by the results of the first boat
we immediately built a second boat for J.R.

After a long winter, a new boat, and a warm spring day one
gets very anxious to get out and paddle around. The second
weekend in April provided the warm spring day. Since the
lakes were still frozen, Sand Creek at Jordan, Minnesota was
chosen as trial water for our boats.

Neither Joanne nor I had ever spent time in a whitewater
canoe or kayak. Within five minutes after push off at Sand
Creek we found ourselves upside down for no apparent reason.
Fortunately we upset in rather quiet water. This was also
our first experience with wet suits, and fortunately, they
worked out just fine. Shaken, but not finished, we pushed
off again. After a fast mile we got strained through a fal-
len tree and again we flipped when I ducked a branch being
"unsprung". While dragging ourselves and the canoe to shore
through the fast and cold water we decided that more working
experience with the Yugo was required.

5

Articles (8) · Summaries (8)

Generated issue overview: November 1969 issue of the Minnesota Canoe Association's HUT, Volume 4, Number 1. The issue includes canoeing and boat-building features, conservation material, race coverage, club news, a recipe, correspondence, and a book review.

Generated summaries are descriptions, not original captured text. Page-range text shows complete scan pages and may include neighboring material.

Even the Best Made Plans of Mice and Men

Title transcribed from original publication

Generated summary: Westerhaus recounts planning a family whitewater trip, building C2 canoes in his basement, learning to paddle, and having a rain-soaked week on the Wolf River followed by a later successful run.

Open scan page 4

Read captured pages 4–6 →

IMPORTANCE OF SAVING MINNESOTA'S CANOE COUNTRY

Title transcribed from original publication

Generated summary: The piece argues that mineral prospecting threatens the Boundary Waters Canoe Area and describes the wilderness protections, mineral-rights issues, and possible impacts of mining.

Open scan page 7

Read captured page 7 →

GUESS WHAT, HONEY, I'M GOING TO BUILD A CANOE

Title transcribed from original publication

Generated summary: A humorous account from a spouse's perspective follows the stages of a husband's canoe-building project, from persuading her to approve it through building, launching, and learning to paddle together.

Open scan page 12

Read captured pages 12–13 →

Knights of Columbus first Missouri National Invitational Columbus Day Endurance Canoe Races--Bonne Terre, Missouri

Title transcribed from original publication

Generated summary: A report describes the rainy October 12, 1969 endurance canoe race in Bonne Terre, Missouri, praising the organizers and recounting the race format. The page also contains race-result tables, which are not treated as separate articles.

Open scan page 14

Read captured page 14 →

FIBERGLASS “TRICKS OF THE TRADE”

Title transcribed from original publication

Generated summary: Westerhaus shares practical tips for fiberglass-reinforced epoxy boat construction, including ventilation, floor protection, mold support, cutting glass strips, reinforcement, mixing resin, and spray-skirt sewing.

Open scan page 15

Read captured page 15 →

CHORP

Title transcribed from original publication

Generated summary: A short snack recipe suggests mixing equal parts chocolate pieces, raisins, and peanuts, with sugared dates as an optional addition.

Open scan page 16

Read captured page 16 →

ORACLE

Title transcribed from original publication

Generated summary: A question-and-answer section discusses the contents and storage of resin catalyst and gives historical advice for exposure or ingestion.

Open scan page 18

Read captured page 18 →

The Great River, or Down the Great River

Title transcribed from original publication

Generated summary: Ketter reviews Captain Willard Glazier's account of a canoe journey down the Mississippi, calling the book a classic and recommending it to readers who can find a copy.

Open scan page 18

Read captured page 18 →