Automatically captured text may contain recognition errors. Compare it with the original scan.
This shows the complete scan page, including any other material on it.
é) REINFORCED EPOXY BOAT CONSTRUCTION TIME
Frequently asked: "How long does it take to make a fiber-
glass boat?" And the answer is: "It depends." It depends
on factors such as type and size of the boat, condition of
the mold(s), experience and dedication of the personnel in-
volved, etc.
To get some idea of the time required to make a boat the
following figures may be used as a basis for extrapolation.
I make a 13.5' one-man kayak from a good quality MCA mold.
Most of the work was done without assistance, and my ex-
perience level could be described as moderate. The follow-
ing work breakdown applied:
Mold preparation (wax and put on
mold release 4
Cut glass to size and cut strips 5
Floor preparation 2
Gel-cote application 2
Major layup 3 layers 7.5 oz. glass cloth
plus 2 layers polyproplene for
hull; 2 glass plus 2 poly for
deck; 6 layers glass for seat 14
Trim hull and deck to flange 2
Trim seat and mold removal 1
Seam hull to deck 4
Boat removal and trim seam (external and
internal ) 5
sand and insert seats 2
Fill ends, insert grab loops and finish
sanding 2
Cleanup 2
TOTAL 45 man hours
Note: Time does not include effort to obtain materials
and molds. Finished weight was 31 pounds.
MATERIAL COST BREAKDOWN
18 yds. (60" width) 7.5 oz. fiberglass cloth
@ $1.25/ya. $22.50
14 yds. (60" width) polyproplene cloth
@ $1.60/ya. 22.40
2 gallons resin @ $8.50/gal. 17.00
MCA mold rental fee 20.00
Misc. (brushes, rollers, mold release, etc.) 10.00
Total Cost Approx. “$92.00
By Andy Westerhaus
16